Datapath dL8 Manual de usuario

Quick Start GuideVersion 01.00

10The DVI-D Input dialog Fig.10 allows you to copy the EDID from devices connected to the outputs. This fuction is used if all the connected outputs

11SpecicationPhysical Dimensions 19”-Rack mount (1U) (438mm x 40mm x 172 mm)Input Connectors DVI-D (Dual Link)USB (Type B) for host communicationsI

Safety Instructions (UK)To prevent damage to your Datapath product or injury to personnel operating the equipment, please read the following safety pr

Datapath dL8Congratulations on your purchase. The Datapath dL8 is an eight output distribution amplier for ultra-high resolution Dual-Link DVI sign

4Step 2 UnpackingInspect items for damage. Should any items show any signs of damage, report it immediately to your supplier.Retain packaging mater

5Step 3Getting Started• Ensure the power supply for the DVI source is disconnected.• Connect the cable from the DVI source to the input socket on th

6Step 4Operation IndicatorsThe front panel has three LEDs to indicate the operational status of the dL8:• Power• Input• StatusPowerWhen illuminated

7Step 5Conguring the dL8Installing the dL8 Driver and Software ApplicationNote: Do not plug the dL8 into a USB port until the driver installation i

8Fig. 6The main control dialog is divided into the following groups:ConnectionDVI-D InputEDID Prefered ModeDVI-I OutputsConnection DiagramThe connect

9To boost the equalization hardware click on the Settings button and the following dialog is displayed. Fig 9.Fig. 9Use the slider to compensate for